- Home
- Catalog
- Flame SFX
- Liquid Flames SFX Standalone
- uFlamer II, incl. nozzle “PM”
uFlamer II, incl. nozzle “PM”
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the uFlamer II, incl. nozzle “PM”. Tick what you need.
Description
uFlamer® II is the second generation liquid flame thrower to generate bigger and higher flames than it’s prodecessor uFlamer. And it is the first liquid flamer equipped with flame monitoring functions. With dual built-in high pressure pump, it can generate a powerful flame throw upto 12m with better combustion rate. Aluminum housing struture, durable metal tube structure, multi safety configurations etc to meet the high demanding professional market.
Specifications:
Description
Features and advantages
Bigger and higher flame upto 12m
Aluminum housing struture, premium quality design
Powerful dual pump ensure higher combustion rate, less fuel residue
The first liquid flamer with flame monitoring function
Multi safety configurations: cascadable power cut-off E-stop connector, ARM indicator light, safety switch etc.
Dual valve, dual igniter
8L Built-in fuel tank
Durable metal tube structure
Built-in 18650 battery design
Technical data
| Dimensions (L × W × H) | 46 × 33 × 33 cm |
|---|---|
| Power | 500 W |
| Runs on | Liquid flame fuel (Isopar) |
| Tank capacity | 8 L |
| Fuel | ISOPAR L, ISOPROPANOL |
| Mains frequency | 50/60 Hz |
| DMX connector | 3-pin and 5-pin XLR IN/OUT |
| DMX in/out | Yes |
| Wireless control | Yes |
| Use in rain | Yes |
| Tilt protection | Yes |
| Ignition | Dual high voltage electronic ignition |
| Article code | VH-SVuFLII |
Show all specifications (33 more)
| Flame monitoring | Yes |
|---|---|
| Housing | Die-casting Aluminum |
| Battery | 16x 18650 Li-ion cells |
| Dual igniter | Yes |
| Dual valve | Yes |
| Effect direction | Vertical |
| DMX channels modes | 2CH-P, 2CH-N, 6CH |
| Pyro signal input | 9-60V |
| Wireless DMX receiver | 5-pin DMX IN with DC5V power supply (optional RMEMD062) |
| E stop interface | Yes |
| E stop daisy chain max | 24 |
| Battery backup | Yes |
| Battery standby | 24 h |
| Liquid level sensor | Yes |
| Fuel tube filter | Yes |
| Tip sensor | Yes |
| Max. tilt | 45 ° |
| Arm indicator light | Yes |
| Stereo stand hole | Yes |
| Stand hole diameter | 36 mm |
| Stand hole depth | 62 mm |
| Nozzle options | EL_SFSMA027: max 6m, L_SFSMA024: max 8m, PM_SFSMA028: max 10m, H_SFSMA026: max 12m |
| Default nozzle | Nozzle PM (SFSMA028), up to 10m |
| Safety radius by nozzle | EL_6m: 2m, L_8m: 2.5m, PM_10m: 3m, H_12m: 3.5m |
| Safety directional by nozzle | EL_6m: 9m, L_8m: 12m, PM_10m: 15m, H_12m: 18m |
| Max. wind speed caution | 8 m/s |
| Max. wind speed stop | 17 m/s |
| Fuel flash point recommended | 60–80 °C |
| Dc12v external fuel pump port | Yes |
| Safety distance upward min setting | 9 m |
| Effect height min setting | 6 m |
| Voltage | 100–240 V |
| Fuel consumption m | 60 ml/s |
New to dry hire? Read how dry hire works.
Consumables
All consumables →
Isopropyl alcohol / Isopropanol (IPA)5 L
Magic FXIsopar L5 L
Isopropyl alcohol / Isopropanol (IPA)10 L
Isopar L10 L
Magic FXIsopar L25 L
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Liquid Flames SFX Standalone
View all →
Explo X2 Wave Flame, incl. outdoor nozzle
Magic FX Flameblazer 5-way, incl. nozzle "L"
Magic FX Flameblazer, incl. nozzle "L"
Showven uFlamer Max plus, incl. nozzle “XXH”
