- Home
- Catalog
- Flame SFX
- Liquid Flames SFX Standalone
- Showven uFlamer Volcano, incl. nozzles “M”
Showven uFlamer Volcano, incl. nozzles “M”
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Showven uFlamer Volcano, incl. nozzles “M”. Tick what you need.
Description
uFlamer Volcano is high end liquid flamer system with five nozzles, each nozzle can firing individually or simultaneously. Volcano with 90 preset firing sequences, 25L built-in fuel tank and pumping system, multi safety design and reliable valve component allowing operators to create spectacular firing effects much easier. It is an ideal choice for fireworks displays, outdoor concert, opening ceremony, sports, scenic area etc.
- 5-heads plug and play liquid flamer with effects up to 10
- Independent control of each head
- 25L built-in stainless steel fuel tank,support automati crefueling station
- Real-time fuel level display
- Integrated valve block design, premium and independent jet valve
- Customized waterproof igniter and structure design, can be used in rain
- DMX control, compatible with 9-60V pyro signal
- Safety switch, intelligent electronic control alarming system
Size: 63 cm x 45 cm x 40 cm
Technical data
| Dimensions (L × W × H) | 63 × 45 × 40 cm |
|---|---|
| Weight | 48 kg |
| Power | 2000 W |
| Runs on | Liquid flame fuel (Isopar) |
| Tank capacity | 25 L |
| Fuel | ISOPAR (G/H/L/M), ISOPROPANOL |
| Mains frequency | 50/60 Hz |
| Power connector | Neutrik PowerCON TRUE1 |
| DMX channels | 6 |
| DMX modes | 6CH-N (Normal), 6CH-P (Pro), 6CH-S (Safe) |
| DMX connector | Seetronic 3-pin XLR & 5-pin XLR |
| DMX in/out | Yes |
| Article code | VH-Vol |
Show all specifications (45 more)
| DMX address range | 1-512 |
|---|---|
| Wireless control | optional (RMEMD062 wireless receiver) |
| Use in rain | Yes |
| Operating temperature | -20 – 50 °C |
| Tilt protection | Yes |
| Tilt protection angle | 45 ° |
| Ignition | high voltage electronic ignition |
| Housing | 304 stainless steel |
| Flame heads | 5 |
| Flame angles | 5 directions, -40° to +40° |
| Fuel recommended | ISOPAR L (flash point 60-80°C) |
| Tank material | 304 stainless steel |
| Fuel consumption m | 60 ml/s |
| Fuel consumption l | 30 ml/s |
| Fuel consumption el | 15 ml/s |
| Nozzle standard | SFSMA025 (Nozzle M) |
| Nozzle m short flame | 5–7 m |
| Nozzle m long flame | 8–10 m |
| Nozzle l short flame | 3–5 m |
| Nozzle l long flame | 6–8 m |
| Nozzle el short flame | 3–4 m |
| Nozzle el long flame | 4–6 m |
| Safety radius nozzle m | 6 m |
| Safety directional nozzle m | 15 m |
| Safety radius nozzle l | 5 m |
| Safety directional nozzle l | 12 m |
| Safety radius nozzle el | 4 m |
| Safety directional nozzle el | 9 m |
| Pyro signal input | 9-60V DC |
| Preset sequences | 97 |
| Internal pump | Yes |
| Auto refueling support | Yes |
| Fuel level display | Yes |
| Safety lock | key switch TEST MODE / USER MODE |
| Wind speed max use | 17 m/s |
| Wind speed caution | 8 m/s |
| Horizontal only | Yes |
| Compatible controllers | SHOWVEN ZK6200, ZK6300, FXcommander |
| Firing duration range | 10-2540 (DMX value x10ms), permanent up to 8s (2s if 5 heads simultaneous) |
| Pressure display | Yes |
| Fuel input coupler | G1/4 ISO7241B, max 0.8MPa external pressure |
| Safety distance upward min setting | 9 m |
| Effect height min setting | 6 m |
| Voltage | 200–240 V |
| Voltage alt | 100 – 120 V |
New to dry hire? Read how dry hire works.
Consumables
All consumables →
Isopar L10 L
Isopropyl alcohol / Isopropanol (IPA)10 L
Isopropyl alcohol / Isopropanol (IPA)5 L
Magic FXIsopar L5 L
Magic FXIsopar L25 L
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Liquid Flames SFX Standalone
View all →
Explo X2 Wave Flame, incl. outdoor nozzle
Magic FX Flameblazer 5-way, incl. nozzle "L"
Magic FX Flameblazer, incl. nozzle "L"
Showven uFlamer Max plus, incl. nozzle “XXH”
