- Home
- Catalog
- Flame SFX
- Liquid Flames SFX Standalone
- Showven uFlamer Max plus, incl. nozzle “XXH”
Showven uFlamer Max plus, incl. nozzle “XXH”
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Showven uFlamer Max plus, incl. nozzle “XXH”. Tick what you need.
Description
uFlamer ®Max HYRED is a customized version of uFlamer® Max, with a firing duration up to 3 seconds, designed for professionals who require longer firing durations.
uFlamer ®Max is the first standalone liquid flamer with flames upto to 20m. Built-in pumping system and fuel tank makes it the only plug and play big liquid flame units available on market. Equipped with auxillary igniter and triple high voltage igniters ensure successful ignition.
Specifications:
Features and advantages
The first standalone liquid flamer with flames upto to 20m
Built-in pump and fuel tank, plug and play system
Equipped with external fuel input quick coupler
Compact size
Triple high voltage igniters
Flame monitoring function
Multi safety configurations: cascadable power cut-off E-stop connector, ARM indicator light, safety switch etc.
Durable metal tube structure
Technical data
| Dimensions (L × W × H) | 42.5 × 57 × 38 cm |
|---|---|
| Power | 2500 W |
| Runs on | Liquid flame fuel (Isopar) |
| Max. firing duration | 0.5 s |
| Tank capacity | 17 L |
| Fuel | ISOPAR L/M |
| Mains frequency | 50/60 Hz |
| DMX modes | 2CH-P, 2CH-N, 6CH |
| DMX in/out | Yes |
| Wireless control | Yes |
| Use in rain | Yes |
| Tilt protection | Yes |
| Article code | VH-uFAVM |
Show all specifications (28 more)
| Tilt protection angle | 45 ° |
|---|---|
| Ignition | triple high voltage electronic ignition with auxiliary ignition |
| Flame monitoring | Yes |
| Housing | 304 stainless steel |
| Display | Yes |
| DMX channels max | 6 |
| DMX pin 3 | Yes |
| DMX pin 5 | Yes |
| Wireless DMX receiver compatible | Yes |
| Pyro signal input | 9 – 60 V |
| E-stop interface | Yes |
| E-stop series connection | Yes |
| Effect direction | vertical |
| Liquid level sensor | Yes |
| Fuel tube filter | Yes |
| Touch buttons | 4 |
| Arm indicator light | Yes |
| Dc12v external fuel pump output | Yes |
| External fuel in quick coupler | ISO7241B G1/4 Male |
| Min. firing interval | 3 s |
| Wind caution speed | 8 m/s |
| Wind stop speed | 17 m/s |
| Nozzle main | NOZZLE XXH (SFSMA029) |
| Nozzle auxiliary | NOZZLE EL (SFSMA027) |
| Flightcase available | Yes |
| Transformer 110v 220v available | Yes |
| Voltage | 200–240 V |
| Fuel consumption | 1 L/s |
Downloads
New to dry hire? Read how dry hire works.
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Liquid Flames SFX Standalone
View all →
Explo X2 Wave Flame, incl. outdoor nozzle
Magic FX Flameblazer 5-way, incl. nozzle "L"
Magic FX Flameblazer, incl. nozzle "L"
Showven uFlamer Volcano, incl. nozzles “M”
