- Home
- Catalog
- Flame SFX
- Liquid Flames SFX Standalone
- Magic FX Flameblazer 5-way, incl. nozzle "L"
Magic FX Flameblazer 5-way, incl. nozzle "L"
Brand: Magic FX
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Magic FX Flameblazer 5-way, incl. nozzle "L". Tick what you need.
Description
The Magic FX Flameblazer is a state-of-the-art liquid flame system. This high quality flame head is extremely fast and responsive. It is very reliable because of its high quality pump, dual ignition and its fully integrated, key-activated enable circuit. It can be activated and secured with the remote arm controller. Safety for everyone on stage and user confidence for the FX operator! A revolution in special FX, next level safety!
Size: 41 cm x 30 cm x 27.5 cm
Weight: 18.6 kg
Voltage: 220-250 VAC
Power: 395 W
Control: DMX-512
DMX channels: 2
Output: S nozzle up to 6 m / M nozzle up to 8 m / L nozzle up to 10 m max
Consumables: Isopropanol / Isopar
Technical data
| Dimensions (L × W × H) | 59 × 39 × 45 cm |
|---|---|
| Weight | 32.25 kg |
| Power | 395 W |
| Runs on | Liquid flame fuel |
| Tank capacity | 10 L |
| Mains frequency | 50 – 60 Hz |
| Power connector | Neutrik powerCON TRUE1 (in & out) |
| DMX channels | 6 |
| DMX channels | 5 |
| DMX connector | Neutrik 5-pole male/female XLR |
| DMX protocol | DMX512-A (ANSI E1.11) |
| RDM | ANSI E1.20 |
| Article code | VH-MFX1402 |
Show all specifications (47 more)
| RDM | Yes |
|---|---|
| Operating temperature | -10 – 50 °C |
| Max. wind speed | 32 km/h |
| Mounting | 4x M10 mounting nut (bottom), Doughty Half Coupler M10 |
| Tilt protection | Yes |
| Ignition | spark (electronic ignition probes) |
| CE | Yes |
| Num nozzles | 5 |
| Nozzle angles | 36–18–0–18–36 ° |
| Nozzle simultaneous fire | No |
| Nozzle s effect height | 6 m |
| Nozzle m effect height | 8 m |
| Nozzle l effect height | 10 m |
| Nozzle included | L (SFX1403, 5x) |
| Consumables approved | Isopropanol, ISOPAR G, H & L |
| Consumption s nozzle l | 1.4 min |
| Consumption m nozzle l | 1.6 min |
| Consumption l nozzle l | 3.5 min |
| DMX enable address | Yes |
| DMX start address range | 1-508 |
| Arm system required | Yes |
| Arm override key | Yes |
| Arm connector | Neutrik etherCON RJ45 (in & out) |
| Tilt lock function | Yes |
| Max. tilt angle | 45 ° |
| Mirror outputs | Yes |
| Individual output disable | Yes |
| Effect duration max per nozzle | 5 s |
| Safety eye | Yes |
| FX warning LED | Yes |
| Humidity rh | 20 – 90 |
| Noise level dba at 3m | 79 |
| Danger zone l nozzle radius | 2.5 m |
| Danger zone l nozzle height | 15 m |
| Danger zone m nozzle radius | 2 m |
| Danger zone m nozzle height | 12 m |
| Danger zone s nozzle radius | 1.5 m |
| Danger zone s nozzle height | 9 m |
| Hazardous zone l nozzle x | 6 m |
| Hazardous zone l nozzle y | 4.5 m |
| Hazardous zone m nozzle x | 4.5 m |
| Hazardous zone m nozzle y | 3.5 m |
| Hazardous zone s nozzle x | 4 m |
| Hazardous zone s nozzle y | 3 m |
| Directives | LVD 2014/35/EU, EMC 2014/30/EC, RoHS 2011/65/EU, WEEE 2012/19/EU |
| Manual part number | PART02556 rev 01-00 |
| Initial release date | 22-05-2025 |
New to dry hire? Read how dry hire works.
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Liquid Flames SFX Standalone
View all →
Explo X2 Wave Flame, incl. outdoor nozzle
Magic FX Flameblazer, incl. nozzle "L"
Showven uFlamer Max plus, incl. nozzle “XXH”
Showven uFlamer Volcano, incl. nozzles “M”
