1. Home
  2. Catalog
  3. Flame SFX
  4. Liquid Flames SFX Standalone
  5. Explo X2 Wave Flame, incl. outdoor nozzle

Explo X2 Wave Flame, incl. outdoor nozzle

VH-X2
Starting price €350.00 For 1–3 days rental · excl. VAT and deliveryPrices for professional clients, excl. VAT
  • Inspected and tested before every rental
  • Comes with its documentation: manual and certificates
  • Shipped from our 12,000 m³ warehouse in Affligem, Belgium
  • Reachable outside office hours too

Description

The Explo X2 Wave Flame Head is a fluid driven flame effect with moving-head technology. This compact flame effect can produce flames up to 9m high which can rotate in 1 direction for 210°! With a built-in 10 liter fluid reservoir and a built-in pump system there is no need for any additional pressure vessels and is it very simple to set-up the effect that provides creative people endless possibilities.

Size: 55.8 cm x 33.5 cm x 35.2 cm
Weight: 27 kg
Voltage: 230 V
Power: 350 W
Control: DMX-512
DMX channels: 6
Output: max 10 m 
Consumables: ISOPAR, Bioethanol or Isopropylalcohol

Technical data

Dimensions (L × W × H)57.5 × 33.6 × 37.3 cm
Weight30.2 kg
Power350 W
Runs onLiquid flame fuel
Tank capacity10 L
DMX channels6
DMX modesDMX 512, Easy DMX
DMX connector3-pin XLR
DMX in/outYes
Wireless controlYes
Ignitionelectrical high voltage spark
Housingstainless steel
Article codeVH-X2
Show all specifications (37 more)
Swivel radius210 °
Swivel range-105 to +105 degrees
Radio range800 m
DMX start address1 – 507
Double solenoid valveYes
Fuze 12vdc10 A
Fuze 230vac10 A
Watchdog timerYes
Mechanical block max angle120 °
Angle blocker optionalYes
Radio protocolExplo X2 bidirectional
Usable fluidsBioethanol 99%, Isopropanol 99% (IPA), ISOPAR G, ISOPAR H, ISOPAR L, ISOPAR M
Recommended fluid additive10-20mL castor oil per 10L
Internal pumpYes
External pump variantYes
Nozzle 10m standardYes
Nozzle 5m optionalYes
Safety roof 10m nozzle15 m
Safety sides 10m nozzle14 m
Safety front back 10m nozzle3.5 m
Safety roof 5m nozzle7 m
Safety sides 5m nozzle6 m
Safety front back 5m nozzle2.5 m
Arming delay20 s
Tripod min load50 kg
Drip pan recommended size70x50cm, depth 5cm
Key switchYes
Positions15
Position step15 °
DMX positionscontinuous -105 to +105 degrees
Max. opening time2540 m/s
Max. continuous ignition8 s
Drive time 105deg170 m/s
Drive time 90deg150 m/s
Drive time 0deg0 m/s
Software updatableYes
Firmware angle blockerv1.56

New to dry hire? Read how dry hire works.

About flame effects

How it works

Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.

What you need

Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.

Safety

Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.

Frequently asked questions

Can flame effects be used indoors?

Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.

Explo X2 Wave Flame, incl. outdoor nozzle €350.00 for 1–3 days