- Home
- Catalog
- Flame SFX
- Liquid Flames SFX Standalone
- Magic FX Flameblazer, incl. nozzle "L"
Magic FX Flameblazer, incl. nozzle "L"
Brand: Magic FX
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Magic FX Flameblazer, incl. nozzle "L". Tick what you need.
Description
The Magic FX Flameblazer is a state-of-the-art liquid flame system. This high quality flame head is extremely fast and responsive. It is very reliable because of its high quality pump, dual ignition and its fully integrated, key-activated enable circuit. It can be activated and secured with the remote arm controller. Safety for everyone on stage and user confidence for the FX operator! A revolution in special FX, next level safety!
Size: 41 cm x 30 cm x 27.5 cm
Weight: 18.6 kg
Voltage: 220-250 VAC
Power: 395 W
Control: DMX-512
DMX channels: 2
Output: S nozzle up to 6 m / M nozzle up to 8 m / L nozzle up to 10 m max
Consumables: Isopropanol / Isopar
Technical data
| Dimensions (L × W × H) | 50 × 38.5 × 38.5 cm |
|---|---|
| Weight | 19.49 kg |
| Power | 400 W |
| Runs on | Liquid flame fuel (Isopar) |
| Max. effect duration | 5 s |
| Tank capacity | 5 L |
| Fuel | Isopropanol, ISOPAR G, H & L |
| Mains frequency | 50–60 Hz |
| Power connector | Neutrik powerCON TRUE1 (in & out) |
| DMX channels | 2 |
| DMX connector | Neutrik 5-pole XLR male/female |
| DMX in/out | Yes |
| Article code | VH-MFX1403 |
Show all specifications (30 more)
| DMX protocol | DMX512-A (ANSI E1.11) |
|---|---|
| RDM | ANSI E1.20 |
| RDM | Yes |
| Control | DMX, Pyro |
| Operating temperature | -10 – 50 °C |
| Operating humidity | 20 – 90 % |
| Max. wind speed | 32 km/h |
| Ignition | electronic spark |
| Nozzle s height | 6 m |
| Nozzle m height | 8 m |
| Nozzle l height | 10 m |
| Nozzle s consumption ml | 12 s |
| Nozzle m consumption ml | 30 s |
| Nozzle l consumption ml | 50 s |
| Nozzle included | L |
| Safety zone s nozzle | 2 m |
| Safety zone m nozzle | 2.5 m |
| Safety zone l nozzle | 3 m |
| Clearance height s nozzle | 9 m |
| Clearance height m nozzle | 12 m |
| Clearance height l nozzle | 15 m |
| DMX enable address range | 1-512 |
| DMX start address range | 1-512 |
| Pyro input voltage vdc | 9 – 40 |
| Arm connector | Neutrik etherCON / RJ45 |
| Pyro connector | 4mm banana socket |
| Noise level db at 3m | 79 |
| Max. tilt | 45 ° |
| Required controller | MAGICFX FX-ARM CONTROLLER (MFX3220) |
| Power daisy chain | Yes |
New to dry hire? Read how dry hire works.
Accessories
Linked to this item in our system
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Liquid Flames SFX Standalone
View all →
Explo X2 Wave Flame, incl. outdoor nozzle
Magic FX Flameblazer 5-way, incl. nozzle "L"
Showven uFlamer Max plus, incl. nozzle “XXH”
Showven uFlamer Volcano, incl. nozzles “M”
