- Home
- Catalog
- Flame SFX
- Magic FX Liquid Flame System
- Magic FX Liquid flame pump station
Magic FX Liquid flame pump station
Brand: Magic FX
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Magic FX Liquid flame pump station. Tick what you need.
Description
The pump station serves as the fuel, power, and control hub of the liquid flame system. It features two output groups (A/B), each with one fuel, one power, and one data output, capable of servicing one or multiple flame heads. The internal pump unit draws fuel from the 100L tank and delivers pressurized fuel to the flame heads through hoses. Requiring a 32A power supply, the pump station distributes power to the connected flame heads via each output group's power output.
Technical data
| Dimensions (L × W × H) | 80 × 59 × 96 cm |
|---|---|
| Weight | 178.5 kg |
| Power | 2300 W |
| Runs on | Liquid flame fuel |
| Max. effect duration | 5 s |
| Tank capacity | 100 L |
| Fuel | Isopropanol, ISOPAR G, H & L |
| Mains frequency | 50–60 Hz |
| Power connector | Neutrik powerCON 32A |
| DMX connector | Neutrik 5-pole male/female XLR |
| DMX protocol | DMX512-A (ANSI E1.11) |
| RDM | RDM (ANSI E1.20) |
| Article code | VH-MFX1420 |
Show all specifications (35 more)
| Indoor / outdoor | outdoor or large well-ventilated indoor |
|---|---|
| Operating temperature | -10 – 50 °C |
| Operating humidity | 20 – 90 % |
| Max. wind speed | 32 km/h |
| Tilt protection | Yes |
| CE | Yes |
| Manual revision | 01-00 |
| Weight full | 278.5 kg |
| DMX control | Yes |
| RDM control | Yes |
| Arm connector | Neutrik etherCON RJ45 (in & out) |
| Arm system required | Yes |
| Output groups | 2 |
| Max hellfire heads per station | 2 |
| Max flameblazer heads per station | 16 |
| Humidity condensing | No |
| Configure options | On Device & RDM |
| DMX enable address range | 1-512 |
| DMX start address range | 1-512 |
| DMX enable value on | 100-154 |
| DMX effect trigger value | 200-255 |
| Lock tilt heads | Yes |
| Tilt error threshold | 5 ° |
| Display dimmer | Yes |
| Display dimmer timeout | 30 s |
| Drain modes | Manual Drain, Power Drain |
| External fill pump support | Yes |
| Max. auto fill | 80 % |
| Auto fill trigger | 40 % |
| Power supply required | 32A |
| Directives | LVD 2014/35/EU, EMC 2014/30/EC, RoHS 2011/65/EU, WEEE 2012/19/EU |
| RDM sensor status | 0=idle, 1=armed, 2=enabled |
| RDM sensor tank level | % of tank |
| Sequential DMX addresses | Yes |
| Voltage | 220–250 V |
Downloads
New to dry hire? Read how dry hire works.
Accessories
Linked to this item in our system
Magic FX SFX Safety arm controller, incl. 2 x terminator & case
Magic FX External filling pump
Magic FX Liquid flame pump support kit
Consumables
All consumables →
Isopropyl alcohol / Isopropanol (IPA)5 L
Magic FXIsopar L5 L
Isopropyl alcohol / Isopropanol (IPA)10 L
Isopar L10 L
Magic FXIsopar L25 L
Works with
Magic FX Hellfire head, incl. nozzle "XL"
Magic FX Flameblazer head, incl. nozzle "L"
Magic FX Firestorm head, incl. nozzles "L"
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Magic FX Liquid Flame System
View all →
Hyred Liquid flame 2-way manifold: 1/2” in -> 1/4” out + 1/2” out
Magic FX External filling pump
Magic FX Firestorm head, incl. nozzles "L"
Magic FX Flameblazer head, incl. nozzle "L"
Magic FX fuel distribution block; 1 x 1/2" in -> 4 x 1/4" out -> 1 x 1/2" out
Magic FX Fuel Hose 3/8" (1/4"coupling), 5 m
Magic FX Fuel Hose 3/8" (1/4"coupling), 10 m
