- Home
- Catalog
- Flame SFX
- Magic FX Liquid Flame System
- Magic FX Flameblazer head, incl. nozzle "L"
Magic FX Flameblazer head, incl. nozzle "L"
Brand: Magic FX
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Magic FX Flameblazer head, incl. nozzle "L". Tick what you need.
Description
The Flameblazer Head is an SFX output component for the Liquid Flame System, emitting flames into the air. It receives pressurized liquid fuel from the Pump Station and ejects it through a nozzle across spark ignition probes to produce the flame effect. The Flameblazer Head offers three interchangeable nozzles: L (included) for up to 10m flames, M (accessory) for up to 8m flames, and S (accessory) for up to 6m flames.
Technical data
| Dimensions (L × W × H) | 26 × 30 × 17.5 cm |
|---|---|
| Weight | 9.65 kg |
| Power | 133 W |
| Runs on | Liquid flame fuel |
| Mains frequency | 50–60 Hz |
| Power connector | Neutrik powerCON TRUE1 (in & out) |
| RDM | Yes |
| IP rating | IP54 |
| Indoor / outdoor | outdoor or large well-ventilated indoor spaces |
| Operating temperature | -10 – 50 °C |
| Operating humidity | 20 – 90 % |
| Max. wind speed | 32 km/h |
| Article code | VH-MFX1423 |
Show all specifications (28 more)
| Mounting | stage floor or truss (M10 half coupler) |
|---|---|
| Ignition | spark (electronic ignition probes) |
| CE | Yes |
| Data connector | Neutrik etherCON RJ45 (in & out) |
| Arm system required | Yes |
| DMX control | Yes |
| DMX configured via | PUMP STATION |
| Nozzle included | L nozzle (SFX1404) |
| Nozzle options | L (up to 10m), M (up to 8m), S (up to 6m) |
| Consumable types | Isopropanol, ISOPAR G, H & L |
| Consumable consumption l nozzle ml | 50 s |
| Consumable consumption m nozzle ml | 30 s |
| Consumable consumption s nozzle ml | 12 s |
| Safety zone l nozzle radius | 3 m |
| Safety zone l nozzle height | 15 m |
| Safety zone m nozzle radius | 2.5 m |
| Safety zone m nozzle height | 12 m |
| Safety zone s nozzle radius | 2 m |
| Safety zone s nozzle height | 9 m |
| Max heads per pump station | 16 |
| Pump station output groups | 2 |
| Max. tilt angle unlocked | 25 ° |
| Max. tilt angle locked | 90 ° |
| Safety eye | Yes |
| FX warning LED | Yes |
| Safety distance upward min setting | 9 m |
| Effect height min setting | 6 m |
| Voltage | 220–250 V |
New to dry hire? Read how dry hire works.
Accessories
Linked to this item in our system
Magic FX SFX Safety arm controller, incl. 2 x terminator & case
Magic FX Liquid flame pump station
Magic FX Liquid flame pump support kit
Magic FX nozzle exchange tool
Magic FX Flameblazer nozzle "S"
Magic FX Flameblazer nozzle "M"
Magic FX fuel distribution block; 1 x 1/2" in -> 4 x 1/4" out -> 1 x 1/2" out
Magic FX Fuel Hose 3/8" (1/4"coupling), 5 m
Magic FX Fuel Hose 3/8" (1/4"coupling), 10 m
Consumables
All consumables →
Isopropyl alcohol / Isopropanol (IPA)5 L
Magic FXIsopar L5 L
Isopropyl alcohol / Isopropanol (IPA)10 L
Isopar L10 L
Magic FXIsopar L25 L
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Magic FX Liquid Flame System
View all →
Hyred Liquid flame 2-way manifold: 1/2” in -> 1/4” out + 1/2” out
Magic FX External filling pump
Magic FX Firestorm head, incl. nozzles "L"
Magic FX fuel distribution block; 1 x 1/2" in -> 4 x 1/4" out -> 1 x 1/2" out
Magic FX Fuel Hose 3/8" (1/4"coupling), 5 m
Magic FX Fuel Hose 3/8" (1/4"coupling), 10 m
Magic FX Fuel Hose 5/8" (1/2"coupling), 10 m
