- Home
- Catalog
- Flame SFX
- Magic FX Liquid Flame System
- Magic FX Hellfire head, incl. nozzle "XL"
Magic FX Hellfire head, incl. nozzle "XL"
Brand: Magic FX
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Magic FX Hellfire head, incl. nozzle "XL". Tick what you need.
Description
The Hellfire is an SFX output component for the Liquid Flame System, designed to emit flames into the air. Pressurized liquid fuel from the external pump unit, the Pump Station, is delivered to the flame head. The fuel is expelled through the flame head nozzle, passing over spark ignition probes to ignite and produce the flame effect. The Hellfire can create flames up to 15 meters in height, with performance unaffected by wind conditions.
Technical data
| Dimensions (L × W × H) | 30 × 30 × 31 cm |
|---|---|
| Weight | 20.7 kg |
| Power | 370 W |
| Runs on | Liquid flame fuel |
| Mains frequency | 50–60 Hz |
| Power connector | Neutrik powerCON TRUE1 (in & out) |
| RDM | Yes |
| Operating temperature | -10 – 50 °C |
| Operating humidity | 20 – 90 % |
| Max. wind speed | 32 km/h |
| Mounting | stage floor or truss halfcoupler M10 |
| Ignition | spark probe electronic |
| Article code | VH-MFX1421 |
Show all specifications (18 more)
| Data connector | Neutrik etherCON RJ45 (in & out) |
|---|---|
| Arm system required | Yes |
| DMX control | Yes |
| DMX config | via PUMP STATION |
| Consumables supported | Isopropanol, ISOPAR G, H & L |
| Consumable consumption ml | 280 s |
| Max. tilt angle unlocked | 25 ° |
| Max. tilt angle locked | 90 ° |
| Safety zone shape | cylindrical |
| Safety radius | 5 m |
| Safety height | 30 m |
| Outdoor indoor | outdoor or large well-ventilated indoor |
| Probe gap pair | 4 (+/-2) |
| Probe gap opposite | 16 (+2) |
| E stop support | Yes |
| Beacon support | Yes |
| Pump station outputs | 2 (A/B) |
| Voltage | 220–250 V |
New to dry hire? Read how dry hire works.
Accessories
Linked to this item in our system
Magic FX Liquid flame pump station
Magic FX SFX Safety arm controller, incl. 2 x terminator & case
Magic FX Liquid flame pump support kit
Consumables
All consumables →
Isopropyl alcohol / Isopropanol (IPA)5 L
Magic FXIsopar L5 L
Isopropyl alcohol / Isopropanol (IPA)10 L
Isopar L10 L
Magic FXIsopar L25 L
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
More in Magic FX Liquid Flame System
View all →
Hyred Liquid flame 2-way manifold: 1/2” in -> 1/4” out + 1/2” out
Magic FX External filling pump
Magic FX Firestorm head, incl. nozzles "L"
Magic FX Flameblazer head, incl. nozzle "L"
Magic FX fuel distribution block; 1 x 1/2" in -> 4 x 1/4" out -> 1 x 1/2" out
Magic FX Fuel Hose 3/8" (1/4"coupling), 5 m
Magic FX Fuel Hose 3/8" (1/4"coupling), 10 m
