Showven Sparkular Max (BT66), excl. powder
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Showven Sparkular Max (BT66), excl. powder. Tick what you need.
Description
SPARKULAR® MAX is the most powerful unit in the series, engineered for the most demanding professional stages. It creates massive, rich, and consistent spark fountains with an extremely wide height adjustment ranging from 5 to 15 meters. With a full 950g hopper of powder you can count on roughly 14 minutes of effect in total, and its IPX3 weatherproof design makes it the ultimate choice for stadium-level shows and large-scale outdoor celebrations.
Specifications:
Features and advantages
5-15m extremely wide effect height adjustment
Rich and full sparks effect
950g hopper: roughly 14 minutes of effect per fill
Ipx3 weatherproof structure design
Technical data
| Dimensions (L × W × H) | 46 × 42 × 33 cm |
|---|---|
| Weight | 45 kg |
| Power | 3200 W |
| Runs on | Spark granules |
| Hopper capacity | 950 g |
| Consumption | 70 g/min |
| Consumable | HC8200 LARGE IV (granules) |
| Max. continuous firing | 30 s |
| Mains frequency | 50/60 Hz |
| Power connector | Neutrik PowerCon TRUE1 (IN + OUT) |
| DMX channels | 2 |
| DMX modes | 2CH-N / 3CH-P with safety channel (default: 2CH-N) |
| Article code | VH-SPMAX |
Show all specifications (17 more)
| DMX connector | 3-pin XLR and 5-pin XLR (both IN/OUT) |
|---|---|
| DMX in/out | Yes |
| Wireless control | No |
| Operating temperature | -10 – 50 °C |
| Display | Yes |
| Effect height gears | 10 |
| Effect direction | straight up |
| Max. tilt angle | 45 ° |
| Preheat | 10 min |
| RFID card required | Yes |
| RFID card reusable | No |
| RFID adds minutes per 200g | 20 |
| RFID max recharge | 30 min |
| Waterproof | Yes |
| Safety clearance above effect | 2 m |
| Set temperature default | 580 °C |
| Set temperature range | 520–620 °C |
New to dry hire? Read how dry hire works.
Consumables
All consumables →
Showven Sparkularpowder set200 glarge IV
Showven Sparkularpowder set200 glarge III
Showven Sparkularpowder set200 glarge
Showven Sparkularpowder set200 glarge II
Showven Sparkularpowder set200 glarge I
About cold spark machines
How it works
A cold spark machine heats a metal powder and blows it out as a fountain of sparks. There is no pyrotechnic composition inside: the units run on mains power and DMX. The sparks are hot particles that cool down quickly, which is why the units can stand closer to people than fireworks — but never touch them.
Which unit
Floor fountains such as the Sparkular, Sparkular II and Magic FX Sparxtar; higher jets such as the Sparkular Jet and Jet II; the Sparkular Fall for the truss; the Sparkular Waver, which tilts during the effect; and the handheld Sparkular Blaster.
What you need
Each unit runs on its own powder, and the grade sets the effect height. The Showven Sparkular units only run with an RFID card that adds run time per bag of powder, so order the powder together with the units: it is in consumables. For control you need a DMX controller from control gear.
Safety
Keep the manufacturer’s safety radius from the product sheet, keep the floor under the fall-out free of carpet and anything flammable, and agree with the venue on smoke detection before the show. Using them indoors? Read cold spark indoors: what you need.
Frequently asked questions
Do I need a permit for a cold spark machine?
A cold spark machine is not a pyrotechnic article, but venues and local authorities can set their own conditions. Ask the venue’s safety officer early.
More in Spark SFX
View all →
Magic FX Sparxtar, excl. powder
Showven Sparkular (BT01), excl. powder
Showven Sparkular Blaster, incl case, power supply & battery
Showven Sparkular Cyclone (BT61), excl. powder
Showven Sparkular Cyclone II (BT63), excl. powder
Showven Sparkular Fall (BT04), excl. powder
Showven Sparkular host controller
