Showven Sparkular II (BT11) , excl. powder
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Showven Sparkular II (BT11) , excl. powder. Tick what you need.
Description
SPARKULAR® II is an upgrade of the patented SPARKULAR® platform, combining valuable customer feedback, current technology and years of experience. Comparing with the SPARKULAR®, SPARKULAR® II with effect up to 6m, much lower noisy, more powerful feeding structure and real time motor status monitoring ensure less stuck and safer firing. 3.2” LCD color screen, touch keypad, flat structure design etc modern features makes it more user friendly when operating the system. It is an ideal choice for circumstance where low noisy output and higher spark effects are preferred.
Technical data
| Dimensions (L × W × H) | 28.6 × 28 × 25.8 cm |
|---|---|
| Weight | 9 kg |
| Power | 500 W |
| Runs on | Spark granules |
| Hopper capacity | 325 g |
| Max. run time | 30 s |
| Mains frequency | 50/60 Hz |
| Power in/out | Yes |
| DMX channels | 2 |
| DMX modes | 2CH-N / 3CH-P |
| DMX connector | 3-pin and 5-pin XLR |
| DMX in/out | Yes |
| Article code | VH-BT11 |
Show all specifications (21 more)
| Wireless control | Yes |
|---|---|
| Operating temperature | -20 – 40 °C |
| Tilt protection | Yes |
| Display | 3.2 inch color LCD |
| Voltage alt | 100 – 120 V |
| RFID card required | Yes |
| Tilt max angle | 45 ° |
| Consumable hc8200 large height | 3 – 6 m |
| Consumable hc8200 medium height | 2 – 4.5 m |
| Consumable hc8200 small height | 1.5 – 3 m |
| Max cascade 220v | 6 |
| Max cascade 110v | 3 |
| Preheat | 5 min |
| Max. recharge time | 30 min |
| RFID card time per card | 20 min |
| Safety radial small medium | 1 m |
| Safety radial large | 1.5 m |
| Fountain height levels | 10 |
| Jet mode | Normal / Silent |
| Safety clearance above effect | 1 m |
| Voltage | 200–240 V |
New to dry hire? Read how dry hire works.
About cold spark machines
How it works
A cold spark machine heats a metal powder and blows it out as a fountain of sparks. There is no pyrotechnic composition inside: the units run on mains power and DMX. The sparks are hot particles that cool down quickly, which is why the units can stand closer to people than fireworks — but never touch them.
Which unit
Floor fountains such as the Sparkular, Sparkular II and Magic FX Sparxtar; higher jets such as the Sparkular Jet and Jet II; the Sparkular Fall for the truss; the Sparkular Waver, which tilts during the effect; and the handheld Sparkular Blaster.
What you need
Each unit runs on its own powder, and the grade sets the effect height. The Showven Sparkular units only run with an RFID card that adds run time per bag of powder, so order the powder together with the units: it is in consumables. For control you need a DMX controller from control gear.
Safety
Keep the manufacturer’s safety radius from the product sheet, keep the floor under the fall-out free of carpet and anything flammable, and agree with the venue on smoke detection before the show. Using them indoors? Read cold spark indoors: what you need.
Frequently asked questions
Do I need a permit for a cold spark machine?
A cold spark machine is not a pyrotechnic article, but venues and local authorities can set their own conditions. Ask the venue’s safety officer early.
More in Spark SFX
View all →
Magic FX Sparxtar II, excl. powder
Magic FX Sparxtar, excl. powder
Showven Sparkular (BT01), excl. powder
Showven Sparkular Blaster, incl case, power supply & battery
Showven Sparkular Cyclone (BT61), excl. powder
Showven Sparkular Cyclone II (BT63), excl. powder
Showven Sparkular Fall (BT04), excl. powder
