- Home
- Catalog
- Flame SFX
- Gas Flame SFX
- Showven uFlamer Gasbar
Showven uFlamer Gasbar
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Description
uFlamer Gasbar is a professional gas flamer designed for creating versatile and dynamic flame bar scenes.It supports flexible combinations to build custom shapes such as flame walls, circles, or fire dragons. Users can create chasing flames, flames waves, and continuous rhythmic dynamic effects . Built with a weatherproof stainless steel structure and compatible with multiple gas supply options, it is the ultimate, cost-effective solution for both indoor and outdoor grand ceremonies.
Specifications:
Dimension: 505 x 173 x 388 mm
Weight: 16.8kg
Input Voltage: AC100-240V, 50-60Hz
Work Power: 150W
Battery: 8*18650 battery
Interface: NEUTRIK POWERCON TRUE1 IN/OUT; Waterproof 3-pin and 5-pin XLR IN/OUT
Control: DMX 512; Wirelss DMX Receiver (5-PIN DMX IN with DC5V power supply)
Ignition: High Voltage Electron Ignition×2
High Sensitive Flame Monitoring: Yes
Temperature Monitoring: Real-time PCB and internal system temperature monitoring
Pressure: 0 - 1.0 MPa
Effect Direction: Vertical
Flame Height: Adjustable (Depending on sequence settings)
Firing Duration: 0.1s -60 mins
Fuel: LPG propane or butane gas, etc.
Fuel Connection: 3 x 7/16-28 UNEF interfaces; 1 x Gas cylinder coupler
Features and advantages
Dynamic flame bar effects
Flexible combinations to create versatile flame wall shapes
Dual ends controllable ignition allows to create chasing flames, flame waves etc dynamic effects
DMX adjustable flame effect heights
Built-in gas cartridge holder and external gas cylinder quick coupler
18650 battery powered design
Max. 60min super long firing durations
Multi safety designs: flame monitoring, multi temp. sensor, E-stop etc.
Technical data
| Dimensions (L × W × H) | 17.3 × 50.5 × 38.8 cm |
|---|---|
| Weight | 17.8 kg |
| Power | 150 W |
| Runs on | Propane, Butane |
| Min. firing duration | 0.1 s |
| Mains frequency | 50/60 Hz |
| DMX channels | 6 |
| DMX modes | 6CH-N, 6CH-P, 6CH-M |
| DMX in/out | Yes |
| RDM | Yes |
| Wireless control | Yes |
| Use in rain | Yes |
| Article code | VH-uGB |
Show all specifications (36 more)
| Mounting | horizontal preferred, M10 screw holes for clamps |
|---|---|
| Tilt protection | Yes |
| Ignition | dual high voltage electronic ignition |
| Flame monitoring | Yes |
| Housing | 304 stainless steel |
| Effect direction | vertical up |
| Effect length | 500 mm |
| Ignition positions | both ends |
| Temp monitoring | triple sensor |
| Max. firing duration | 60 min |
| Max. gas pressure | 20 bar |
| Max. gas pressure external | 15 bar |
| Cartridge holder | triple, 3 shut-off valves, 3 non-return valves, quick coupler for external cylinder |
| Cartridge interface | 7/16-28UNEF |
| Micro filter | Yes |
| Tip sensor | Yes |
| Arm indicator light | Yes |
| Battery cells | 8x 18650 Li-ion (Panasonic NCR18650B 3400mAh recommended) |
| Battery standby time | 23.5 h |
| Battery firing time | 2.67 h |
| Battery charge time | 4 h |
| DMX pin 3 | Yes |
| DMX pin 5 | Yes |
| Wireless DMX receiver pin | 5-pin XLR IN with DC5V |
| E stop interface | Yes |
| E stop daisy chain max | 24 |
| Safety lock switch | Yes |
| Max. safety radial a1 | 5 m |
| Max. safety radial a2 | 4 m |
| Safety directional b | 4.5 m |
| Flame height at 10 25c | 0.2–0.7 m |
| Flame height at neg10 10c | 0.1–0.5 m |
| Flame height at 25 40c | 0.3–0.9 m |
| Flame height max 1mpa external | 1.3 m |
| Cartridge test config | 3x 450g cartridges, approx 40min firing |
| Tilt stop angle | 45 ° |
New to dry hire? Read how dry hire works.
More in Gas Flame SFX
View all →
Explo Fire bowl plus, 230V, Ø 60 cm
Explo Fire bowl plus, 230V, Ø 90 cm
Explo GX2, 230 V, excl. hose
Explo SFX Torch
Explo X2 Power Flame, liquid propane flame effect
Hansol Cauldron flame, ∅ 40 cm
Hansol Power Flame 1, (max. 6 m)
