Showven Sparkular Jet (BT91), excl. powder
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Showven Sparkular Jet (BT91), excl. powder. Tick what you need.
Description
Transform any event into a spectacular display with the Sparkular Jet! This powerful special effects machine generates instant spark fountains up to 10 meters high, indoors or out, without the need for an external pressure tank. With a built-in air compressor and user-friendly design, setup is quick and easy, making it the perfect alternative to 1s traditional fireworks for festivals, concerts, and more.
- Flashing SPARKULAR effect similar to 1s fountain fireworks
- Adjustable effect height up to 10m
- Built-in auto air compressor, plug and play
- No gunpowder and no pyro smell
- Built-in pressure sensor and safety valve for double security
- DMX control, easy setup and installation
- 3-PIN AND 5-PIN XLR IN/OUT, Neutrik powerCON TRUE1 connector
- Stainless steel housing
Technical data
| Dimensions (L × W × H) | 32 × 28 × 30 cm |
|---|---|
| Weight | 16.5 kg |
| Power | 350 W |
| Runs on | Spark granules |
| Hopper capacity | 450 g |
| Mains frequency | 50/60 Hz |
| Power connector | Neutrik PowerCon TRUE1 |
| DMX channels | 2 |
| DMX connector | 3-pin and 5-pin XLR |
| DMX in/out | Yes |
| DMX address range | 1-512 |
| Operating temperature | -10 – 50 °C |
| Article code | VH-BT91 |
Show all specifications (16 more)
| Tilt protection | Yes |
|---|---|
| Tilt protection angle | 45 ° |
| Housing | 304 Stainless steel |
| Max cascade 100 120v | 3 |
| Max cascade 200 240v | 6 |
| Effect height large | 7-10 (HC8200 LARGE) |
| Effect height medium | 5-8 (HC8200 MEDIUM) |
| Consumable model | HC8200 |
| Consumption rate g per shot | 10-15 |
| RFID card required | Yes |
| Built in compressor | Yes |
| Jet delay | 0.6 – 1 s |
| Auto heat | Yes |
| Safety clearance above effect | 2 m |
| Voltage | 200–240 V |
| Voltage alt | 100 – 120 V |
New to dry hire? Read how dry hire works.
About cold spark machines
How it works
A cold spark machine heats a metal powder and blows it out as a fountain of sparks. There is no pyrotechnic composition inside: the units run on mains power and DMX. The sparks are hot particles that cool down quickly, which is why the units can stand closer to people than fireworks — but never touch them.
Which unit
Floor fountains such as the Sparkular, Sparkular II and Magic FX Sparxtar; higher jets such as the Sparkular Jet and Jet II; the Sparkular Fall for the truss; the Sparkular Waver, which tilts during the effect; and the handheld Sparkular Blaster.
What you need
Each unit runs on its own powder, and the grade sets the effect height. The Showven Sparkular units only run with an RFID card that adds run time per bag of powder, so order the powder together with the units: it is in consumables. For control you need a DMX controller from control gear.
Safety
Keep the manufacturer’s safety radius from the product sheet, keep the floor under the fall-out free of carpet and anything flammable, and agree with the venue on smoke detection before the show. Using them indoors? Read cold spark indoors: what you need.
Frequently asked questions
Do I need a permit for a cold spark machine?
A cold spark machine is not a pyrotechnic article, but venues and local authorities can set their own conditions. Ask the venue’s safety officer early.
More in Spark SFX
View all →
Magic FX Sparxtar II, excl. powder
Magic FX Sparxtar, excl. powder
Showven Sparkular (BT01), excl. powder
Showven Sparkular Blaster, incl case, power supply & battery
Showven Sparkular Cyclone (BT61), excl. powder
Showven Sparkular Cyclone II (BT63), excl. powder
Showven Sparkular Fall (BT04), excl. powder
