- Home
- Catalog
- Flame SFX
- Color Flames SFX
- Showven cFlamer Volcano, incl. nozzle "cH"
Showven cFlamer Volcano, incl. nozzle "cH"
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Showven cFlamer Volcano, incl. nozzle "cH". Tick what you need.
Description
cFlamer Volcano is a 5 heads flamer integrated with 5 systems inside the machine, it can generate 5 different colors at different firing angles at the same time. Each of the output nozzle can be controlled separately, that means you can firing any nozzle individually or all 5 nozzles all together at the same time.
Specifications:
Technical data
| Dimensions (L × W × H) | 69 × 52.5 × 37.5 cm |
|---|---|
| Weight | 76 kg |
| Power | 2000 W |
| Runs on | Liquid flame fuel |
| Tanks | 5 |
| Fuel | SHOWVEN color fluid, ISOPAR L, ISOPROPANOL |
| Max. continuous firing | 2 s |
| Mains frequency | 50/60 Hz |
| DMX channels | 6 |
| DMX modes | 6CH-N, 6CH-M, 6CH-P |
| DMX connector | 3-pin and 5-pin XLR IN/OUT |
| DMX in/out | Yes |
| Article code | VH-cFLVOL |
Show all specifications (43 more)
| Wireless control | Yes |
|---|---|
| Use in rain | Yes |
| Tilt protection | Yes |
| Ignition | High voltage electronic ignition, dual igniters x5 |
| Housing | Stainless steel + Aluminum |
| Display | Yes |
| Igniter count | 10 |
| Output count | 5 |
| Wireless DMX receiver | 5-pin DMX IN with DC5V power supply (optional RMEMD062) |
| Pyro signal input | 9-60V |
| E stop interface | Yes |
| E stop daisy chain | Yes |
| Effect direction | Vertical (5 outputs, firing angles -40° to +40°) |
| Flame height ch nozzle | 8 – 10 m |
| Flame height cl nozzle | 5 – 6 m |
| Nozzle ch code | SFSMA033 |
| Nozzle cl code | SFSMA037 |
| Tank capacity l per output | 5 |
| Tank total capacity | 25 L |
| Color options | Red, Green, Blue, Yellow, Purple (SHOWVEN original color fluid only) |
| Fuel tube filter | Yes |
| Tip sensor | Yes |
| Arm light | Yes |
| Preset sequences | 94 |
| Safety distance side a ch | 5 m |
| Safety distance front back c ch | 3 m |
| Safety distance firing direction b ch | 15 m |
| Safety distance side a cl | 4 m |
| Safety distance front back c cl | 2.5 m |
| Safety distance firing direction b cl | 9 m |
| Max. wind speed caution | 8 m/s |
| Max. wind speed stop | 17 m/s |
| Bottom mount holes | 4x M10 depth 20mm |
| RFID card reserved | Yes |
| Short flame height ch | 5 – 7 m |
| Long flame height ch | 8 – 10 m |
| Short flame height cl | 3 – 4 m |
| Long flame height cl | 5 – 6 m |
| Cleaning interval days | 7 |
| Safety distance upward min setting | 9 m |
| Effect height min setting | 6 m |
| Voltage | 200–240 V |
| Voltage alt | 100 – 120 V |
New to dry hire? Read how dry hire works.
Consumables
All consumables →
Hyred Color flamefluidyellow25 L
Hyred Color flamefluidblue25 L
Hyred Color flamefluidred25 L
Hyred Color flamefluidgreen25 L
Isopropyl alcohol / Isopropanol (IPA)5 L
Magic FXIsopar L5 L
Isopropyl alcohol / Isopropanol (IPA)10 L
Isopar L10 L
Showven color flame additive125 mlred
Showven color flame additive125 mlgreen
Showven color flame additive125 mlblue A
Showven color flame additive15 mlblue B
Showven color flame additive125 mlpurple
Magic FXIsopar L25 L
About flame effects
How it works
Flame units produce real fire on cue, from a short burst to a column of several metres. Gas units burn propane or a propane/butane mix from cartridges or cylinders. Liquid units atomise a flame fluid and ignite it, which gives a flame with more body; some can add colour.
What you need
Fuel: gas cartridges, or a gas cylinder with regulator and hose, or flame fluid. The nozzle sets the size of the flame. Fuels and colour additives are in consumables; hoses, regulators and nozzles are in the accessories of each unit. Not sure whether gas or liquid suits your show? Read liquid vs gas flame: how to choose.
Safety
Every unit has its own safety distances and an indoor or outdoor rating; respect what the product sheet and the manual say. Keep an extinguisher at hand, watch the wind outdoors, and use a safety arm system so that no effect can fire by accident.
Frequently asked questions
Can flame effects be used indoors?
Some units can, in large venues and with the approval of the venue and the fire service; others are for outdoor use only. Check the rating on the product sheet.
