- Home
- Catalog
- Flame SFX
- Color Flames SFX
- Showven cFlamer Boom, incl. nozzle "cM"
Showven cFlamer Boom, incl. nozzle "cM"
Brand: Showven
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Showven cFlamer Boom, incl. nozzle "cM". Tick what you need.
Description
Showven cFlamer Boom is a never-seen special effect system with triple amazing effects including flame ball, sparks, and boom sound. It can use the regular fuel such as ISOPAR, ISOPROPANOL. In the meantime it can also use the color fluid to generate color flame balls.
Size: 58 cm x 40 cm x 42.8 cm
Weight: 54 kg
Voltage: 220-250 VAC
Power: 600 W
Control: DMX-512
DMX channels: 6
Output: up to 8-10 m max
Consumables: color fluid / Isopropanol / Isopar
Technical data
| Dimensions (L × W × H) | 58 × 40 × 42.8 cm |
|---|---|
| Weight | 102.5 kg |
| Power | 600 W |
| Runs on | Liquid flame fuel, Spark granules |
| Tank capacity | 5.3 L |
| Fuel | SHOWVEN color fluid / ISOPAR L / ISOPROPANOL |
| Mains frequency | 50/60 Hz |
| Power in/out | Yes |
| DMX channels | 6 |
| DMX address range | 1-507 |
| Wireless control | Yes |
| Use in rain | Yes |
| Article code | 921221469 |
Show all specifications (33 more)
| Ignition | Dual high voltage electronic ignition |
|---|---|
| Housing | Stainless steel + Aluminum |
| Display | Yes |
| Ignition nozzle type | cM |
| DMX 3pin in out | Yes |
| DMX 5pin in out | Yes |
| Pyro signal input | 9-60V |
| E-stop interface | Yes |
| E-stop daisy chain | Yes |
| E-stop max units | 24 |
| Effect direction | Vertical |
| Effect height flame ball | 10 m |
| Effect height sparks | 12 m |
| Safety radius | 6 m |
| Safety directional | 15 m |
| Fuel colors available | Red, Green, Blue, Yellow, Purple |
| Fuel consumption per shot | 200 ml |
| Sparks consumable | SHOWVEN HC8200 LARGE |
| Sparks consumption per shot | 25 g |
| Sparks shots per 200g RFID card | 20 |
| Sparks shots max recharge | 80 |
| Air tank volume | 8 L |
| Air tank pressure rebuild time | 3 min |
| Fuel tube filter | Yes |
| Tip sensor | Yes |
| Tip protection angle | 45 ° |
| Arm light | Yes |
| Wireless DMX receiver optional | RMEMD062 (5-pin, 2.4GHz FXcommander compatible) |
| RFID card required | Yes |
| RFID card version | V2.0 |
| Touch buttons | 4 |
| Flightcase optional dimensions | 750x490x508 |
| Nozzle part no | SFSMA032 |
New to dry hire? Read how dry hire works.
Consumables
All consumables →
Hyred Color flamefluidyellow25 L

Hyred Color flamefluidblue25 L

Hyred Color flamefluidred25 L

Hyred Color flamefluidgreen25 L

Isopropyl alcohol / Isopropanol (IPA)5 L

Magic FXIsopar L5 L

Isopropyl alcohol / Isopropanol (IPA)10 L

Isopar L10 L


Showven color flame additive125 mlred


Showven color flame additive125 mlgreen

Showven color flame additive125 mlblue A

Showven color flame additive15 mlblue B

Showven color flame additive125 mlpurple

Magic FXIsopar L25 L

Showven Sparkularpowder set200 glarge

Showven Sparkularpowder set200 glarge II

Showven Sparkularpowder set200 glarge III

Showven Sparkularpowder set200 glarge I




