- Home
- Catalog
- Confetti SFX
- Shooting
- Magic FX Stadium Shot III
Magic FX Stadium Shot III
Brand: Magic FX
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Magic FX Stadium Shot III. Tick what you need.
Description
Massive output in one shot! The MAGIC FX STADIUMSHOT III is half the size of the famous STADIUMSHOT I and II and has the same output! This powerful confetti cannon is equipped with a low noise internal air compressor which saves even more space. DMX onboard and safely controllable by using the FX-ARM CONTROLLER.
Technical data
| Dimensions (L × W × H) | 60 × 40 × 87 cm |
|---|---|
| Weight | 86 kg |
| Power | 350 W |
| Runs on | Confetti, Streamers |
| Mains frequency | 50–60 Hz |
| Power connector | Neutrik powerCON TRUE1 (in & out) |
| DMX channels | 2 |
| DMX connector | Neutrik 5-pole XLR male/female |
| RDM | ANSI E1.20 |
| RDM | Yes |
| Control | DMX512-A (ANSI E1.11) / 24 VDC pyro |
| Outdoor use | Yes |
| Article code | VH-MFX0408 |
Show all specifications (26 more)
| Operating temperature | -10 – 70 °C |
|---|---|
| Operating humidity | 20 – 90 % |
| Tilt protection | Yes |
| Noise level | >70 dB(A) |
| DMX enable address range | 1-512 |
| DMX start address range | 1-512 |
| Pyro input | 9-40 VDC |
| Pyro connector | 4 mm banana socket |
| Arm system required | Yes |
| Arm connector | Neutrik etherCON RJ45 (in & out) |
| Tank max pressure | 8 bar |
| Tank volume | 10.9 L |
| Onboard compressor | Yes |
| Max. compressor fill time | 2.5 min |
| Pressure range | 4–8 bar |
| Max. pressurized time | 15 min |
| Output pipe volume | 5 L |
| Effect distance confetti | 20 m |
| Effect distance streamers | 40 m |
| Safety zone directional confetti | 7 m |
| Safety zone directional streamers | 14 m |
| Safety zone radial | 2 m |
| Hearing protection distance | 5 m |
| DC power | 24 V |
| DC power | 12 W |
| Voltage | 100–250 V |
New to dry hire? Read how dry hire works.
Accessories
Linked to this item in our system
Magic FX SFX Safety arm controller, incl. 2 x terminator & case
CAT5E network / FX arm control data cable, 3 m
CAT5E network / FX arm control data cable, 5 m
CAT5E network / FX arm control data cable, 10 m
CAT5E network / FX arm control data cable, 15 m
CAT5E network / FX arm control data cable, 20 m
CAT5E network / FX arm control data cable, 100 m drum
Confetti & streamers for this unit
All consumables →About confetti effects
How it works
Confetti cannons fire confetti or streamers over the audience in one burst; confetti blowers keep a steady cloud in the air. Launchers run on compressed air or on CO2, depending on the model; handheld confetti shooters need no equipment at all.
What you need
Confetti or streamers of the right size and material — paper, metallic or slowfall — and, depending on the launcher, compressed air or CO2. Each product sheet shows the confetti that fits the unit; everything is in consumables.
Good to know
Plan the clean-up with the venue: metallic and slowfall confetti stay in the air longer and spread further. Never fire a launcher at people at close range, and keep confetti away from flame and cold spark effects.
Frequently asked questions
Paper, metallic or slowfall?
Paper is light and easy to clean up; metallic catches the light; slowfall floats down slowly and stays in the air longest.
More in Shooting
View all →
Magic FX Confetti gun
Magic FX Power Shot II
Magic FX Proshot
Magic FX Shot Base DMX
