Magic FX Psyco2 jet, excl. CO2 hose
Brand: Magic FX
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the Magic FX Psyco2 jet, excl. CO2 hose. Tick what you need.
Description
The PSYCO2JET is a moving CO2 effect that creates cryogenic fog plumes of approximately 8m. high. The nozzle can tilt 180°. The effect can be mounted horizontally or vertically or even sideways. The PSYCO2JET is controlled by DMX. The movement of the nozzle is super fast. The fixture has a number of presets on board to help create an amazing show.
Technical data
| Dimensions (L × W × H) | 48 × 35 × 27 cm |
|---|---|
| Weight | 9.39 kg |
| Power | 35 W |
| Runs on | Liquid CO2 |
| CO2 consumption | 0.5 L/s |
| Mains frequency | 50–60 Hz |
| Power connector | Neutrik powerCON TRUE1 (in & out) |
| DMX modes | RAW (3 channels + 1 safety), PRESET (4 channels + 1 safety) |
| DMX connector | Neutrik 5-pole XLR male/female |
| DMX protocol | DMX512-A (ANSI E1.11) |
| RDM | RDM (ANSI E1.20) |
| RDM | Yes |
| Article code | VH-MFX1117 |
Show all specifications (19 more)
| IP rating | IP23 |
|---|---|
| Operating temperature | -10 – 50 °C |
| Max. operating humidity | 90 % |
| Mounting | stage or truss |
| Truss clamp | 2x M10 twenty clamps (MFX3103) |
| Noise level | 118 dB(A) |
| Humidity non condensing | Yes |
| DMX channels raw | 3 |
| DMX channels preset | 4 |
| DMX safety address | Yes |
| CO2 connector | CO2 Quick Connector 3/8" |
| CO2 nominal pressure | 57 bar |
| Nozzle rotation | 180 ° |
| Nozzle range | -90 to +90 |
| Num presets | 10 |
| Safety angle | 15 ° |
| Power daisy chain | Yes |
| DMX daisy chain | Yes |
| Voltage | 100–250 V |
New to dry hire? Read how dry hire works.
Accessories
Linked to this item in our system
Hyred CO2 hose 3/8” with quick connectors, 5 m
Hyred CO2 hose 3/8” with quick connectors, 10 m
Hyred CO2 hose 3/8” with quick connectors, 15 m
Hyred CO2 hose 3/8” with quick connectors, 20 m
Magic FX CO2 bottle connector to quick connector
About CO2 jets
How it works
A CO2 jet blasts liquid CO2 into the air as a white column of cold vapour that disappears within seconds. A CO2 gun does the same by hand.
What you need
CO2 cylinders with a dip tube, so that the CO2 leaves the cylinder as a liquid, high-pressure hoses and, for several jets, a manifold; plus DMX control from control gear. Prefer no CO2 at all? The Magic FX Eco2Jet makes a similar white plume with a fan and fluid, without CO2 cylinders.
Safety
CO2 displaces oxygen: indoors, make sure the space is well ventilated and plan how much CO2 you release. Never aim a jet at people at close range, secure the cylinders upright and wear gloves when you handle cold parts.
Frequently asked questions
How many CO2 cylinders do I need?
That depends on the number of jets and on how often and how long they fire. Tell us your show and we advise the number of cylinders.
More in CO2 SFX
View all →
Magic FX CO2 Gun II, excl. CO2 hose
Magic FX CO2 Jet II, excl. CO2 hose
Magic FX CO2 Jet, excl. CO2 hose
