- Home
- Catalog
- Smoke SFX
- Haze SFX
- MDG ATMe haze machine, incl. Jem AF-1, excl. MDG neutral smoke fluid & CO2/N2
MDG ATMe haze machine, incl. Jem AF-1, excl. MDG neutral smoke fluid & CO2/N2
Brand: MDG
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Complete your setup?
These items are linked to the MDG ATMe haze machine, incl. Jem AF-1, excl. MDG neutral smoke fluid & CO2/N2. Tick what you need.
Description
The ATMe is a non-stop haze generator capable of creating the finest and almost invisible mist.
It highly emphasizes laser and light beams. It also features variable output.
The ATMe Haze Generator was designed with safety and reliability in mind. It is capable of
generating pure white, non-toxic haze for as long as you have fluid (100% duty cycle).
Technical data
| Dimensions (L × W × H) | 68.5 × 18 × 30 cm |
|---|---|
| Power | 715 W |
| Runs on | Haze fluid, CO2 |
| Tank capacity | 2.5 L |
| Gas | industrial co2 or n2 |
| Warm-up time | 8 min |
| Mains frequency | 50/60 Hz |
| Power connector | powerCON |
| DMX channels | 3 |
| DMX modes | 1 |
| DMX connector | XLR-5 |
| DMX in/out | Yes |
| Article code | VH-ATMESET |
Show all specifications (38 more)
| RDM | ANSI E1.20 |
|---|---|
| RDM | Yes |
| DMX address range | 1-510 |
| Operating temperature | 0 – 50 °C |
| Max. operating humidity | 90 % |
| Storage temperature | -40 – 60 °C |
| Gas consumption (high) | 0.36 kg/h |
| Gas consumption (low) | 0.18 kg/h |
| Fluid consumption (high) | 100 ml/h |
| Fluid consumption (low) | 55 ml/h |
| Approvals | CE, CSA, UL pending |
| Control type | keyboard 4button lcd usb dmx rdm |
| APS purge time | 60 s |
| Fluid pressure high | 2.76 bar |
| Fluid pressure low | 1.38 bar |
| Max. gas pressure | 4.15 bar |
| Max. gas pressure | 60 psi |
| Gas pressure operating | 50 – 60 psi |
| Gas inlet connector | Oxygen Adaptor 9/16-18 R.H. |
| Particle size | 0.5 – 0.7 µm |
| Haze colour | pure white |
| Duty cycle | 100 % |
| Total run time hours high | 23 |
| Total run time hours low | 46 |
| Noise db at 1m theater off | 45 |
| Theater mode | Yes |
| Max. storage humidity | 80 % |
| USB connector | Yes |
| USB type | USB 2.0 type A-B |
| LCD saver | Yes |
| APS auto purge | Yes |
| Overheat shutdown temp | 60 °C |
| Pressure relief valve | Yes |
| Safety clearance front | 2 m |
| Safety clearance below fan | 1 m |
| Min. install height | 1 m |
| Single phase | Yes |
| Voltage | 100–250 V |
Downloads
New to dry hire? Read how dry hire works.
About hazers
How it works
A hazer produces a fine, even mist that hangs in the room and makes light and laser beams visible, without being seen as smoke itself. It can run for hours at a low setting.
What you need
Haze fluid made for the unit (water- or oil-based, see the product sheet), mains power and DMX. A fan helps to spread the haze evenly. Fluids are in consumables.
Safety
Smoke and haze can set off smoke detectors: agree with the venue how detection is handled during the show, and never switch it off yourself. Keep emergency exits and signs visible.
