Hazebase The FAB, 19" cased hazer, 500W
Brand: Hazebase
- Inspected and tested before every rental
- Comes with its documentation: manual and certificates
- Shipped from our 12,000 m³ warehouse in Affligem, Belgium
- Reachable outside office hours too
Description
Due to the adjustability of pump capacity, fan speed and angle of attack of the two air baffles, almost any desired haze density can be generated. It uses a vegan, highly concentrated fluid. This produces the finest droplets with maximum lifetime in the air.
Its two extremely quiet and adjustable fans allow it to be used in areas where ambient noise is a nuisance.
FEATURES
- 5 seconds heat up time
- Haze density 1-100% controllable TFT-Display
- Integrated 2-port switch
- 2 motorized controllable air leading metals Fluids: base*V
Technical data
| Dimensions (L × W × H) | 55 × 54 × 13.5 cm |
|---|---|
| Weight | 16.6 kg |
| Power | 500 W |
| Runs on | Haze fluid |
| Air volume | 200 m³/h |
| Tank capacity | 1 L |
| Max. fluid consumption | 5 ml/min |
| Fluid | base*V (vegan) |
| Warm-up time | 8 s |
| Mains frequency | 50–60 Hz |
| Power connector | PowerCON TRUE1 |
| DMX channels | 3 |
| Article code | VH-Fab |
Show all specifications (31 more)
| DMX modes | Standard 3-channel / Reduced 2-channel |
|---|---|
| DMX connector | 5-pin XLR In/Out |
| DMX in/out | Yes |
| RDM | Yes |
| Wireless control | Yes |
| Operating temperature | 5 – 45 °C |
| Max. operating humidity | 80 % |
| Housing | 19 inch FlightCase 2U |
| Display | 2.8 inch TFT capacitive touch |
| Fluid run time | 3 – 150 h |
| Ethernet | 10/100 Mbit/s |
| Ethernet ports | 2 |
| Ethernet switch builtin | Yes |
| Protocols | DMX512, RDM, JT-Remote, sACN, Art-Net |
| Art-Net | Yes |
| SACN | Yes |
| Cable remote control | Yes |
| Stand alone | Yes |
| Air baffles | motor adjustable, 5 positions |
| Haze output adjustable | 1-100% in 1% steps |
| Fan speed adjustable | 1-100% in 1% steps |
| Integrated battery | 4x NiMH |
| Rack units | 2 |
| Safety distance nozzle | 3 m |
| Safety distance objects | 1.5 m |
| Safety min flammable objects | 60 cm |
| Web server | Yes |
| Firmware update via web | Yes |
| Auto display rotation | Yes |
| Cleaning cycle after stop | 40 s |
| Voltage | 100–240 V |
New to dry hire? Read how dry hire works.
About hazers
How it works
A hazer produces a fine, even mist that hangs in the room and makes light and laser beams visible, without being seen as smoke itself. It can run for hours at a low setting.
What you need
Haze fluid made for the unit (water- or oil-based, see the product sheet), mains power and DMX. A fan helps to spread the haze evenly. Fluids are in consumables.
Safety
Smoke and haze can set off smoke detectors: agree with the venue how detection is handled during the show, and never switch it off yourself. Keep emergency exits and signs visible.
More in Haze SFX
View all →
Le Maitre HazeMaster excl. fluid
Le Maitre MVS hazer, excl. fluid
